REFLEX is a durable rubber surfacing produced from shredded rubber. REFLEX is used in many Childcare Centres, Schools and Shire playgrounds. It is an ideal and cost effective anti-slip surface for all high traffic areas. REFLEX is a site poured and coloured surfacing product which provides a seamless soft-fall surface and is available in a range of earthy colours.

Download: General Specifications Reflex. 

 

VIBRAFLEX Recycled Rubber Surface VIBRAFLEX is a high quality product providing vibrant UV resistant colouring in a hardwearing recycled rubber surface, utilising our unique pre colouring technique. VIBRAFLEX makes a consistent brightly coloured surfacing a cost effective option for a wide range of applications. Site poured to provide a seamless soft-fall surface. Multi coloured surfaces are also easily achieved. Standard colours available are Light & Dark Green, Terracotta, Light Red, Blue & Yellow, however, custom colours are available upon request. The Binder used in the application of this product can produce some initial "yellowing" to the finished surface. This is only temporary and is generally accepted as an industry standard with this product. VIBRAFLEX is an award winning product and has been an excellent alternative to oxided and imported products (EPDM) for almost a decade and is used extensively throughout Australia due to its exceptional record, durability and because it is a purely recycled product which provides a sustainable alternative to Government and Private Corporations.

Vibraflex General Specification

Question and Answers - Playground Safety Surfacing

EPDM (Coloured Rubber) EPDM is an imported granulated non recycled rubber surfacing as seen in some fast food chains and sporting facilities internationally. Site poured to provide a seamless soft-fall surface. Available in a variety of vibrant single or multi coloured finishes. The Binder used in the application of this product can produce some initial "yellowing" to the finished surface. This is only temporary and is generally accepted as an industry standard with this product.

Download: EPDM General Specifications

Equestrian Rubber

 

Golf Course Walkway Rubber Our GOLF WALKWAY surfaces are constructed from recycled rubber which is a durable surfacing produced from shredded and coloured tyre rubber. GOLF WALKWAY is currently used in many Country Clubs and Golf Courses. It is an ideal and cost effective anti-slip surface for high traffic areas. The GOLF WALKWAYS are usually site poured as a strip down the centre of the walking path allowing the golfers to protect their shoe spikes on the soft surface as well as protecting and minimizing wear of the paths and surround areas. The course fibres of the GOLF WALKWAY are ideal to allow golfers to comfortably walk over the surface without breaking the bond between fibres thus enabling the surface to withstand severe traffic without any breakdown.

Download: Enduro Floor Equine and Golf walkway matting

Crown lll Rubber (Artificial Grass/Top Dressing)

Welcome to Crown III, a product that not only helps the environment but will benefit your lawn or turfed area, be it commercial or domestic. Already taking Australia by storm, Crown III has been proven on leading sport's venues, golf courses, education facilities and clubs worldwide. Read on to see how easy Crown III will change the way you manage your turf.

Reduces turf grass wear

Crown III's main purpose is the protection of the turf's crown. This is done by building up a 10-20mm protective layer of rubber between the root zone and blade of the plant enabling a quick recovery time and less maintenance such as re-sodding!!

Lessens reseeding costs

Crown III will lessen the cost of turf renovation because of the turfs resistance to wear and its promotion of turf uniformity.

Provides warmth for more rapid growth.

The blanketing properties of Crown III will not only protect turf but will also produce warmth, which will promote a summer growth pattern throughout the cooler months. The proven results of this in Australia is staggering.

Conserves water

The evaporative layer created by Crown III will cause evaporating water to recondense, hence trapping and allowing the water to re-irrigate. This of course is a terrific advantage in the hot summer months.

Reduces Soil Compaction

The fact that Crown III is rubber gives the turf a "springier" surface and prevents soil from compacting and grass from thatching.

Any one of the above qualities will vastly improve the aesthetic and practical qualities of your turfed area. Over two years of extensive research in Australia's turf industry Crown III has proven to utilise most, if not all of the above qualities in it's applications.

Crown III is protected by a world-wide patent of which Reclaim Industries holds the rights in the South-East Asia Pacific region. This form of Top-Dressing has been used extensively around the world for some years and has only recently been marketed in Australia with staggering results. Some local and international venues you may recognise are as follows:

  • St Andrews GC (Scotland)
  • Lake Karrinyup GC
  • Cardiff Arms Park (Wales)
  • Metropolitan GC Melbourne
  • Pebbles Beach GC (California)
  • Stadium Australia
  • Joondalup Country Club
  • WACA Ground

These are just a few venues throughout Australia and the world that are successfully using Crown III in their Turf Management Toolkit.

Crown III is proudly manufactured by Reclaim Industries out of 100% Recycled Australian Tyre Rubber.

Edge Safe (Safety Edging)

Sand pits are an important play feature and probably the most common site in pre-schools and kindergartens. They also play an important part in a child's everyday play routine. However, gone are the days that traditional timber surrounds are acceptable as an edge to the sandpit. As children ourselves (not too long ago you say) we remember tractor tyres full of sand or just a plain hole, however these days things are a little more structured and sandpits are expected to keep up with the times. Reclaim has been manufacturing and supplying safety edging across Australia for many years and have two models to meet any edge requirements. Our MEO1 Edging is an excellent retaining edge and more suited to sandier areas where retaining needs to start below ground level. In areas where the ground is harder and not so sandy our EdgeSafe product is more ideal and can be easily spiked into the ground. Firm yet flexible rubber edging provides a long term hard wearing alternative to the older more traditional methods of building a sandpit.

Download: Specifications Edgesafe

General Specification - ME01 (PDF 69kb)

 Traffic Calming Products

Recycled Rubber SPEED HUMP Our durable recycled rubber vehicular speed humps are easy to install & constructed in easy to handle sections that can be easily joined at site using quick set epoxy. Whilst tough, the SPEED HUMPS are flexible enough to follow the contour of the road making them ideal for car parks, commercial developments, lane ways and many other applications. They are also pre - striped in safety yellow to allow motorists to see them prior to Negotiating them.

Recycled rubber BOLLARDS Our durable recycled rubber BOLLARDS are easy to install, constructed in Recycled rubber with below ground fixing of re-enforced tubing that can be easily set into position at site. Whilst amazingly resilient with very high impact absorbing qualities, the BOLLARDS are flexible enough to allow minor parking nudges with minimal damage to both the BOLLARDS and vehicles. Ideal for most car park situations.

Recycled rubber CAR STOPPERS Our durable recycled rubber CAR STOPPERS are easy to install, constructed in Recycled rubber with ground fixing of epoxy adhesive and dynabolts or deckspikes making them easy to set into position at site. Ideal for most car park situations.